-
The *PMS5003* pinout on the [LOGOELE datasheet][datasheet] indicate that when `PIN8` is low, `PIN4`/`PIN5` form an `ì2c` bus. When contacted about further information they could not say more.
![pin…
-
### The problem
Just build the Air-Gradient system and using its ESPHome fork to install the firmware.
Direct cable (USB) connect firmware updates work fine and Air-Gradient is running properly.
H…
-
> Do you plan on supporting PMS5003T ?
_Originally posted by @gbalbinot in https://github.com/avaldebe/PMserial/issues/4#issuecomment-544882132_
## Message structure
| `message` | `PMS5003` …
-
https://github.com/esphome/esphome/blob/39c6c2417ac2b3b20f4dbc2457aa380b330a7fb9/esphome/components/pmsx003/sensor.py#L57
I got few pms5003T and they have pm1, pm2.5 and pm10 as well as temp humidi…
-
### The problem
PMS50003ST reporst frantic high data in negative temperatures.
![E4050966-8264-4DCF-8EC1-F022485B94DE](https://user-images.githubusercontent.com/59109996/152447471-1d845d0d-8053-44…
-
### The problem
After recorder run the Database is corrupted.
The error has already occurred twice.
I deleted the database. Exactly after 7 days the error occurs again.
purge_keep_days is set to 7…
-
![PMS5003T_data](https://user-images.githubusercontent.com/30169265/140650101-bbbbfb1a-da3a-4a57-820c-2205398e460a.JPG)
any possible support for PMS5003T with temp and humidity?
-
See PR at playground: https://github.com/letscontrolit/ESPEasyPluginPlayground/pull/104
> existing P053 is PMSx003, have PM2.5 PM1.0 PM10 three parameter, all only for dust.
>
> this new sensor …
TD-er updated
3 years ago
-
Hi all!
Just checked latest mega-20220809 with Wemos D32 mini pro - it's look like an error in AdaGFX helper was expected.
Mega-20220809 was uploaded to clean Wemos D32 mini pro, it can work without…
-
I like this a lot - it follows closely the Arduino ESPEasy structure - which I have running on several devices.
One omission from the particle devices is the SDS011 which is popular amongst the gro…