-
Greetings,
On my system I am using the usbradio channel driver with a simplex radio node. Not realizing that usbradio doesn't have POCSAG support, I issued the following test command, which caused…
-
Hi!
I'm using the pocsag modulator to log messages to a csv file. Sometimes the alpha message contains characters like ' " ' which messes upp the structure of the csv file. Same thing with commas '…
-
Hello when i use the pocsag pager with the hamradio network all i get is corrupted data. See screenshot. I'm not sure what to try
![Screenshot_20240404-174849_Flipper](https://github.com/xMasterX/all…
-
The pager example only looks to generate POCSAG protocol output. There are several other protocols, but one of the other prominent protocols is the Motorola FLEX protocol. It would be nice to have sup…
-
Swedish letter Å Ä Ö does not work in Pocsag. Hopefully that could be fixed :)
-
Hia,
yesterday I discovered that MMDVMHost isn't physically transmitting pocsag-information while showing texts correctly on a Nextion-monitor. Replacing the compiled executable with an older versi…
-
Use this issue to track development of a POCSAG receiver, intended for use on Dapnet at 439.9875 MHz.
Progress:
- [x] Correct modulation, SYNC.
- [x] Receiving frames.
- [x] Decoding frames to r…
-
Hello all,
Can anyone tell me why the pocsag decoder is so intermittent. I have a very strong signal here and only some times decodes? Also does the settings in the pocsag Tx effect the rx set up.
…
-
Since the pocsag is added to this project there are in the flex protocol invalid messages.
payload { "body": "-", "capcodes": [ "1323864", "1321752" ], "groupid": 0, "is_posted": false, "priority":…
-
Hi,
In case you are looking for a new digital protocol to implement, POCSAG TX capability (using the same method you used for the other digital protocols - with tones, rather than using the FSK mod…