-
For example if I want to send knocks on few ports with
`knocker -d 1000 -p tcp somehost.example.com 123 456 789`
command only first knock is sent. All other didnt reach target server.
-
I'm trying to set this up to knock on a sequence of TCP ports, it works fine if I send to a host over the LAN, but when I switch to my carrier's connection none of the packets come through. I see pack…
-
My initial thoughts on the building blocks to make a secure router application/device.
Out of the box, you want to be able to get to a login screen from the point you connect (plug in) to a network…
ag4ve updated
2 years ago
-
Comments for https://www.endpointdev.com/blog/2009/11/port-knocking-with-knockd/
By Greg Sabino Mullane
To enter a comment:
1. Log in to GitHub
2. Leave a comment on this issue.
-
I posted to a few places asking for people to test DOS Frotz on real hardware. So far, only one person replied. The test machine was a 486DX4 running at 75 Mhz with 24M of RAM and no sound card. It…
-
### Feature description | توضیحات ویژگی
https://xtls.github.io/config/outbounds/freedom.html#outboundconfigurationobject
قبلا این ریکيستو زده بودم میشه دوباره تست کنید اگه کار کرد اضافه کنید؟
-
By opening this issue I intend to achieve following goals:
1. Gathering credible and textual evidence of `using active probing methods by Islamic republic`
2. Finding a general solution(presenting `…
-
Has anyone else experienced this? It started happening somewhat recently, probably in the last few months. Something is waking the server up about once an hour. I know that it could be something just …
-
May I ask where the problem was that you did not use tls and https? You probably had a logical reason for it
-
The mahsaNG (https://github.com/GFW-knocker/MahsaNG) application has added a feature called "fake host". In Iran, one of the internet service providers, Irancell, has taken action that has disabled al…