-
Just received a part life notification from Digi-Key, indicating that the MCP4017T-104E/LT digital potentiometer is now end-of-life.
Need to investigate whether this part is really being discontinued…
-
The BOM doesn't list a value for the potentiometers. I'm assuming it doesn't really matter, and I can use a 10k or 100k, but I thought I should check
-
## Issue Description
There is a discrepancy in the instructions for adjusting the current using the potentiometer between the following documents for the Infineon Stepper Motor Control Shield with …
-
I asked chatGPT4o to create a skidl. I then did some editing to the code to get rid of some obvious blunders chatGPT4o made:
```
#!/opt/local/bin/python3.12
import os
# Set KiCad symbol direc…
-
Potentially map the potentiometer to a data pin on the ESP32, so that it can be used beyond just a sensitivity threshold, given there is already software functions written that act similar to a sensit…
-
Hi and thanks a lot for your board!
I am currently gathering the components but cannot find any 250k pots near me... Can i replace it with another value possibly? thank you!
-
```
Using the terminal i have tried to analyze our pot, see the ppt for gross
results and the zip file in download section has the full data
Now we have to decide is there a need of analogue low pas…
-
Hello,
I have tried the THC ADC plugin from Phil Barrett. I had the web builder built the firmware accordingly and flashed it to my Teensy.
I then made a few tests, just with a potentiometer instea…
-
Based on customer feedback, the potentiometer centering - fine tuning topic was discussed between me and @SukuWc.
After testing various potentiometer Grid modules (both PBF4 and PO16), the problem c…
-
Is it possible to add some more description on the potentiometer to the readme?
I was wondering if it is turned up fully can it cause issues such as blown speaker?
Should I start low then tweak…