-
### Guidelines
- [X] I checked for duplicate bug reports
- [X] I tried to find a way to reproduce the bug
### Version
Development (Unstable)
### What happened? What did you expect to happen?
ener…
-
With the WIFI off the remote had a current draw of only ~30mA, but when the ESPNOW radio is turned ON, the current consumption increases to 100mA.
This reduces the battery runtime to 4 hours or les…
-
Hi all!
I am building a simple water sensor that reads a water level from a touch PIN, packs the result into a BLEAdvertisement and goes into deep sleep.
However, during deep sleep the consumption…
-
Hello from Australia! Thank you for the cool solution!
Here our detached houses typically have the water meter on the front verge, often outside and away from any power source. I am considering opt…
-
Visualize and monitor power consumption of jobs and nodes in the web interface.
rezib updated
2 weeks ago
-
The odd negative power consumption value appears after subtracting EV consumption from total consumption. Whilst this should have no effect, negative values are best suppressed to zero.
-
Page: Overview/Metrics
Add power usage metric to the overview page, in the usage box. Show a similar metric to the power usage in `s-tui`.
Linux power can be viewed on my intel system at
```
$…
-
The calculated power consumption of 12V WS2815 is off by 100%. 300 physical LEDs result in 48W, when it should be 90W. Any WS2815 strip i checked online stated 0,3W/Led or 90W/strip for 60Leds/m.
Pl…
xrtze updated
1 month ago
-
I use VT with two electric heaters powered by smart plugs. When Home Assistant is restarted, the "Energy" sensor sometimes goes back to a previous value, causing the Energy dashboard to show negative …
-
### What happened?
Hi,
I am aiming to include this project for my measurements in my thesis, but currently I don't get reliable data from Kepler.
Here is my Dashboard:
![image](https://git…