-
Hey, I really like the design! How is Power Delivery supposed to happen in the V1.3? Only through the Barrel Jack? I would like to power with 16850s or a LiPo Pack, which usually all don't get to the …
-
#### Your system information
* Steam client version: 1705108172
* SteamOS version: 3.5.7
* Opted into Steam client beta?: [Yes]
* Opted into SteamOS beta?: [Yes]
* Have you checked for updates …
-
Is there any way to do this with a network share rather than an hdd directly connected?
The reason I ask is because I'd like to keep my pixel charged to 50% and I do this by using a smart outlet a…
-
Many rc radios does not support charging from pd type c port. PD does not provide 5v at any time, it waits for pull-down resistors on CC1 and CC2 pins. Please add basic pd support to Hardware Requirem…
-
**Hello,**
Recently Microsoft made some changes to how notifications work inside MS Teams.
https://devblogs.microsoft.com/microsoft365dev/retirement-of-office-365-connectors-within-microsoft-tea…
-
VDD power delivery will need to be designed for the CPUs. The input voltage will be 5v. The buck converter must at least be able to support output voltages from 1.15V to 1.95V to support the full rang…
-
integrate Microchip UPD1002 and USB type connector for power supply.
-
stupid question: Does the power supply shown in the BOM plug into the arduino or do you strip it and put it into the other board? Also how does the other board go into the arduino, is it like a shield…
-
What device tree do I need to use? What changes do I need to make in the device tree to achieve this? Or will it work without any modifications in the device tree? Sorry I'm new to this but please hel…
-
The OVDD rail should run at 1.8v. A linear regulator can be used to generate OVDD. The linear regulator used should support an enable/control signal at up to 5v as well as soft-start functionality. Th…