-
using the ethernet red pitaya 125-14, it works fine for RX, however when i change the ppm field , i do not see the signal shift in freq.
it seems the ppm field has no effect on the red pitaya
redp…
DrSDR updated
1 month ago
-
I have read #7
Also using my fcdpp with OpenWebRX+
But setting a frequency offset is not the same as setting the ppm correction which is passed to soapy_connector with the -P parameter.
At the …
-
Hi mIha
on raspberry
if on settings.yml i have sat - freq_offset: 40
in line 161 of receive_meteor.sh
$SATDUMP live meteor_m2-x_lrpt${mode} "$audio_temporary_storage_directory" --source $rec…
i6cbi updated
4 months ago
-
Hello,
Does anyone know if the Pitch (PPM) parameter can be set programatically from commandline?
The reason is that each time my PC wakes from sleep, the pitch is set to -35596. This causes my ap…
-
## Description
On the Facility Locator, the Community Care Services list does not immediately load because it has to query PPMS. While this is happening, users may feel like they are stuck or not real…
-
We run into some problems with the ExplorIR-M-E-100 CO2 sensor as the concentration will read 100% ppm with the provided code from GitHub for Arduino after about 10 - 15 min. The multiplier used to re…
AEH24 updated
1 month ago
-
-
**Purpose:**
Duplicate of n1850.ne30_tn14.hybrid_fatessp.20241111 but with major update to the CAM code and updated CTSM/FATES code (that handles MEGAN correctly).
TODO: Not sure about the updated …
-
I'm simply trying to plot with ppm on the x-axis...
However, when trying to convert from varian to pipe and then "make_uc" the carrier and observe frequencies are not set correctly.
I'm a bit perp…
-
This note caught my eye (this may be related to https://github.com/ietf-wg-ppm/draft-ietf-ppm-dap-taskprov/issues/85):
> TODO: It would make sense for the corresponding extensions to be added to [[…