-
Hi,
There's no question section here but is there a way to use proxmark easy with this?
Ty
-
### Description of the feature you're suggesting.
Can protocol EM4X50 be implemented?
Adding all info I have, also added proxmark dump in case it helps, in proxmark is recognized as EM4X50.
Flip…
-
Hi, I was trying to make this run on MT6752 (Jiayu S3), and I tried to build this myself, [`DickyT/proxmark3-android`](https://github.com/DickyT/proxmark3-android) and finally I got a error `Sending b…
-
Is it possible to make the em4100 clock rate configurable, the badge system I'm trying to emulate requires `EM410x ( RF/32 )` while the ggtag is using `EM410x ( RF/64 )` as read by a proxmark
-
Hi !
I am a new user of proxmark3. I therefore followed every steps of the wiki tutorial to flash my proxmark. I tried the procedure on both kali and ubuntu but when I flash I got the message"waiti…
-
### Describe the enhancement you're suggesting.
Hello,
I tried to read my EGYM (Fitness club) RFID card in order to clone to the ring or bracelet but failed.
[Fit123.psk.raw.zip](https://github.…
-
### Describe the bug.
I have a dual Indala 125 kHz ID and Mifare Classic 13.56 mHz card, and the Mifare classic reads fine on NFC. The Indala should read on the Extra Actions menu but nothing is de…
-
### Description of the feature you're suggesting.
Can't read it.
[RFIDRAW240607.zip](https://github.com/user-attachments/files/15740191/RFIDRAW240607.zip)
### Anything else?
_No response_
-
I'm developing a classic 1k emulator. I'm writing the firmware for atmega and testing the results on the proxmark.
The Proxmark does not check the parity bits in the card responses during the block r…
-
Hi I have a proxmark rdv4 and macos
I managed to run a few commands but i needed to update the firmware to give me access to `hf mf ekeyprn d`.
I went through the wiki guide here. made and flash…