-
As per the topic above, I tried updating the software of the Beaglebone Black, and now I cannot connect to like the bonescript page or follow the setup as per the original device, it just goes straigh…
-
Hello !
I cant use config-pin on beaglebone AI
When I use "config-pin P8.07 gpio" it shows the failure:
"P8_07 pinmux file not found!
Pin has no cape: P8_07"
Here is my version
> git:/opt/sc…
-
[Reported in the Adafruit forum by jgomes78](https://forums.adafruit.com/viewtopic.php?f=49&t=165787) and posting here so that others can see the issue and eventual solution:
> I have a BeagleBone AI…
-
We are currently locked in with kernel 4.19. For normal testbed-usage there is no problem, but [unittests](https://orgua.github.io/shepherd/dev/contributing.html#tests) remove and reload the module fo…
orgua updated
4 months ago
-
**Describe the bug**
This is a collection of issues to be fixed in cloud9-examples or other places in the image to get the TIDL examples running.
# Seems the only real issue right now is the missi…
-
A support has been recently added for Texas Instruments PRU cores, i.e. in AM335x found in Beaglebone. There are prebuilt binaries for amd64 and armhf hosts, but not for Windows.
I tried to follow th…
-
Hey,
We are working on cape for our beaglebone. For our cape we have this overlay:
```
/dts-v1/;
/plugin/;
/ {
compatible = "ti,beaglebone", "ti,beaglebone-black";
part-number =…
-
Hi there, I am trying to use Adafruit UART to enable UART4 to work with some modbus devices, but I am getting an error if I try to setup("UART4").
**code**
`import Adafruit_BBIO.UART as u`
`u.setu…
-
I am using bone-debian-9.9-lxqt-armhf-2019-08-03-4gb.img.xz on sd card and booting from sd.
Everything it's working fine , also if sometimes the system is frozen for 20/30 sec., but I have output on …
-
Hi, I have an issue with my beaglebone. I have tried both BB-CAN1 overlay and the cape-universal overlay, but I cannot see any transmissions on P9.24 and P9.26, when I load BB-CAN1 and I try to verify…