-
**Fabrication Hardware Notes**
_A clear and concise description _
Short Summary:
Fabrication of the PMDWorkBench.
Sliced the file: PMBWorkbench.scad SLT
PMBWorkbench20241006_0719.stl
**Journa…
-
### Printer model
_No response_
### Describe the enhancement
Can G81 results be made accessible using Prusa Connect, rather than requiring a computer running Pronterface and a USB cable? I am using…
-
### Description of the bug
Current slicer profiles for MK4 + MMU3 (1.13.2) offer support for 0.4mm nozzle only. We need more nozzle sizes supported
### Project file & How to reproduce
Selection "C…
thess updated
18 hours ago
-
### Description of the bug
The new option --material-profile works with multi-material printers but gets silently ignored with single-material printers.
For the following examples, I set the filam…
-
### Printer model
MK3S/+
### MMU model
MMU2S
### Firmware versions
3.14.0
### Upgrades and modifications
Prusa MMU2S Rear PTFE Holder (https://www.printables.com/model/22339-prusa…
-
### Description of the bug
If I try to use paint on support, the Slicer freeze and closes itself.
It occour even by using it automatic or manual.
Only occur on low RAM
Windows Event is:
Na…
-
### Description of the bug
The sliced nozzle path leads to floating filament at Z=5mm.
### Proj…
-
### Description of the bug
I am making a multi-object, multi-part, project in PrusaSlicer. One of the parts has ironing enabled, which occurs at an intermediate layer of the other part. When I run …
-
Hello
First of all sorry if my English is not 100% correct.
Second, I installed repsnapper I connected after load the marlin by arduino software... I printed a few squares to configurate the setting …
-
### Description of the bug
Was going to test the new height range painter in the Multi-Material painter on the alpha and came across some strange orientation issues.
I expected the height range to…