-
### The problem
I just had the issue, that the pulse reading from a reed switch (water meter) was off from what the counter counted. After way to long i stumbled over https://esphome.io/components/se…
-
### The problem
I configured the Puls Meter Sensor for a TCR5000 infrared device to count the revolutions of a water meter with a reflective area (nearly a half circle) on the 0.001 m^3 pointer (one …
-
### The problem
Hi. I've used the code from the following link: https://esphome.io/components/sensor/pulse_meter.html
I used it with my Orno WE520, but if it's not lost connection to my WiFi I've…
-
@Gnarfoz @mkaiser @purcell-lab
This feature was suggested by code writer from sungrow this week.
It helps to see ems pulse which is set to reset rever 600s to its default, if not found.
For no…
-
### Checklist
- [X] I am not using Home Assistant. Or: a developer has told me to come here.
- [X] I have checked the troubleshooting section and my problem is not described there.
- [X] I have read…
-
Seems that some of the accumulation calculations are wrong after Tibber updated API on 18th of October. I.e: there was a big drop in accumulated yearly consumption from the tibber data sensor:
![im…
-
### The problem
When using the Pulse Counter Sensor pullups are active and can't be disabled (pullup: false does not do anything either).
If I configure the same Pins as simple binary sensor pullups…
-
**Describe the problem you have/What new integration you would like**
I want to measure pulses that arrive on an analog_threshold binary sensor. The pulse meter sensor would be the best fit, bu…
-
May be stupid but I would like to know how do you know (or calculate) number of pulse by liter in your sensors definition
```cpp
// Sensor Type
// -----------------------
// YF
#define YFS201 4…
-
### The problem
Greetings.
Upgrading from 2023.7.1 to 8.0, the pulse_meter function seems to have broken/changed. The below now causes the counter to go crazy and increment at a high rate endless…
egite updated
6 hours ago