-
[main] Building folder: py32f0_cmake_template-master all
[build] Starting build
[proc] Executing command: chcp
[proc] Executing command: "C:\Program Files\CMake\bin\cmake.EXE" --build p:/SYSTEM_F…
-
Hello first of all TKS a lot for this repo.
I'm wondering if it would be a pain to add PY32F0 series tool (Cortex m0+) with SWD interface?
I want a small tool to program this MCU to add this tool to…
-
====================[ 构建 | py32_cmake_template.elf | Debug ]====================
"C:\Program Files\JetBrains\CLion 2023.3.1\bin\cmake\win\x64\bin\cmake.exe" --build C:\Users\light\OneDrive\PYF002A\PY…
-
Hi,
I try to adapt your code to other families but I have to remark two lines out as it's only available on Py32F002B and it goes to 12ua,
```
/* STOP mode with deep low power regulator ON */
//…
-
Hello again.
Im wondering what is the closest MCU on the STM32 family to this microcontroller?
I want try to port the arduino core for the PY32F0 and i don't want to start from scratch.
-
From a quick glance PY32f002B seems to be quite close to PY32f002A? I noticed `A` has `TIM16`(without output on any pin) while I think `B` instead has `TIM14` with one output. `B` also has 24kB flash …
-
Can support ST-Link V2 to download F200A
how to setup on windows ?
-
Hello,
I'm studying the examples and they're good. For deep sleep this one is relevant:
https://github.com/IOsetting/py32f0-template/blob/main/Examples/PY32F0xx/LL/PWR/PWR_Stop/main.c . My code s…
-
I want to understand where these examples (actually a lot of them!) come from. They look a bit like generated from a codegen tool similar to stm32cubemx.
I was trying to find if puya provides such…
-
In this example:
https://github.com/IOsetting/py32f0-template/blob/main/Examples/PY32F002B/LL/LPTIM/LPTIM_LSI_DeepStop_WakeUp/main.c
```
/**
***************************************************…