-
Solved!! The issue already was put below! Thank you so much!
Hello, there! I hope you all are doing great!
Dears.
I have created a simple graphical interface for selecting the hex file to be…
-
-
see https://github.com/pyocd/pyOCD/issues/1646
Workaround is to use versions earlier than 0.36.
Or use https://github.com/probe-rs/probe-rs - supports the hk32f030m, and is quite a bit faster…
-
# Bug Report
## Describe the bug
On many systems, specifically Windows host systems with a Ubuntu or other Linux VM, the stlink v2's do not seem to work. Even with udev rules they seem to fail. …
-
Very interesting project! I will be keeping an eye on Nanaimo and will pass it along to some folks at Arm.
Also, I'd like to suggest you take a look at [pyOCD][https://github.com/mbedmicro/pyOCD]. …
-
I've recently noticed some issues with 0.36 release (also the 0.36-dev) series. Reverting to an earlier version of pyocd (in this case, 0.35-dev), and everything flashes (and functions) as expected.
…
-
I use a DAPlink to program py32f0 processors. It works with pyocd. When I issue the list command with edgb I get the following reply:
C:\ruudwork\info\Puya\ataradov CLI programmer for DAP>edbg --li…
-
I was trying to test the [ZBOSS NCP Host](https://developer.nordicsemi.com/nRF_Connect_SDK/doc/latest/nrf/protocols/zigbee/tools.html#ug-zigbee-tools-ncp-host) and flashed the image ncp.nrf52840dk_nrf…
-
## Background
I have a Keil pack that is missing a flash memory region which I'd like to manipulate via pyocd.
### Pack
https://developer.arm.com/embedded/cmsis/cmsis-packs/devices/NXP/S32K142U…
-
Hi,
I am trying to use the NXP k66 freedom board with GDBfuzz
It has a Jlink dongle on board.
I tried to launch GDBfuzz using PyOCD but GDBfuzz cannot bootstrap, because it identifies crashes on e…