-
### The problem
Constant crashes with PZEM016 module connected to d1 mini esp8266 using built-in 5V output from module, tried swap tx/rx nothing helped. It's crashing randomly, can run whole day with…
-
Good day,
I absolutely love your PZEM-004T Library and I am in desperate need for help on a library for the PZEM-016 (New model) which uses RS485 as a communication protocol. I don't know where to …
-
Hi,
I have the PZEM-017 with 100A.
I don't get any values displayed. Data is displayed on Windows, so hardware is okay.
What do I have to do to make your program work with the PZEM-017?
…
-
_This is a continuation/summary of discussion in https://github.com/lincomatic/open_evse/issues/175_
Current OpenEVSE hardware (as of April 2024) lacks a voltmeter, and the current meter is not too…
-
Hi, i've using the same setup with pzem 016 and the same d1 mini, but constant crashes appear on the esp microcontroller with some random debug info:
```
Reset Info: Fatal exception:4 flag:1 (Hard…
-
Using PZEM004T with SoftwareSerial is not working. Actually, using an oscilloscope shows that the PZEM is not answering back when using software serial... not sure the reason, but it does when using h…
-
The chip supports this.
This seems to be in the documentation. It would be great.
The format of the master command for calibrating a slave (6 bytes in total):
0xF8 + 0x41 + 0x37 + 0x21 + CRC ch…
-
### PROBLEM DESCRIPTION
It is not possible to restore backup dump files if firmware was compiled with USE_SCRIPT.
I did create 2 firmware files based on tasmota-4M (13.3.0)
Firmware A was done …
-
Hi,
I tried with a 24v inverter from easun which however is identical to the 2424MSE1 of MPP solar looking at the esphome log I see that it sends something but receives nothing I also checked the wir…
-
## Do not report new issues related to this message, instead please comment on this issue with the logs that you see and the config for that component.
### The problem
```
[00:00:00][W][compone…