-
### The problem
Constant crashes with PZEM016 module connected to d1 mini esp8266 using built-in 5V output from module, tried swap tx/rx nothing helped. It's crashing randomly, can run whole day with…
-
I have about 60 active Tasmota devices;
TDM works but seems to be in a perpetual scanning/discovery state, making the app unusable;
App starts populating fields, then hangs, doesn't respond for se…
-
### PROBLEM DESCRIPTION
I have connected a PZEM-004t-v3 to ESP32 (Tasmota 13.4.0(solo1)). R8 where lowered.
It works intermittently for few hours, then it display all zeros in the energy fields. I…
-
Having just read about the support for PZEM004T Energy Monitor from Peacefair. I'm just wondering if it will be possible to add support for PZEM-003 and PZEM-017 DC meter with RS485 from same manufact…
-
Hi guys , i need to read my AC power under 10 seconds to shut down my heatcoil.
How fast is fast or slow?
I hope you can help me before i buy 2 and ship 1 back and buy other 2 for my 3 phase AC.
…
-
### PROBLEM DESCRIPTION
Tasmota with a PZEM016 Sensor is not reporting data correctly since yesterday. Rebooting the tasmota+pzem didn't change anything.
### REQUESTED INFORMATION
_Make sure y…
-
### PROBLEM DESCRIPTION
Is it possible to use Tasmota on the new [SONOFF POW Elite](https://sonoff.tech/product/diy-smart-switch/pow-elite/)?
I found some Pictures [here](https://notenoughtech.com/h…
-
### PROBLEM DESCRIPTION
Hitting "Toggle" button on web admin page causes device to reboot.
### REQUESTED INFORMATION
_Make sure your have performed every step and checked the applicable box…
-
### BUG DESCRIPTION
After update 6.6.0.15-2.5.2 the PZEM004T no value is shown.
- [x] Read the [Contributing Guide and Policy](https://github.com/arendst/Sonoff-Tasmota/blob/development/CONTRIBUTI…
-
### PROBLEM DESCRIPTION
In berry script, the `gpio.pin_used(gpio.OPTION_A,0)` command always returns -1, even if such a gpio pin is configured. Meanwhile, `gpio.pin_used(gpio.OPTION_A, 0)` correc…