-
Hi Leadustin
great work well done
Would you have the Printer.cfg and macro for Qidi X Smart 3
it would save me alot time
if not I'll need to use the current one and clean it up
Cheers
-
Erst mal Danke für deine ganze Arbeit :)
Mir sind beim Umbau meines X-MAX 3 allerdings zwei Dinge aufgefallen:
- Die Homing-Position in der Konfig vom X -MAX 3 ist wahrscheinlich aus der X-Plus Ko…
-
Hi there, new-ish user here. I have been using QIDI slicer on my new X-Plus 3 for the past 2 weeks. Today when I try to open Qidi Slicer, the app launches but the curser is stuck with a loading icon.…
-
I am running Nixos and have tried multiple ways to run this appimage, but everyway it fails.. There seems to be an issue with the dependency with webkit2gtk
-
Does this work with QIDI TECHNOLOGY X-MAX-2 3D printer?
-
Issue:
The Qidi XMAX3 3D printer is currently running on Debian Buster OS, which has reached its End-of-Life (EOL) on June 30th, 2024. The lack of updates since EOL presents several significant risks…
-
Hi
I have QIDI Smart 3 printer and have problem running QIDI Slicer on Ubuntu 22.04. Odd on my old Ubuntu 20.04 everything was OK.
After Printer setup I see
![Screenshot from 2024-06-22 13-29-22…
C3362 updated
2 months ago
-
I managed to update fluidd to version 1.28.1 to get the print queue functionality that I need. The issue I am having is with qidi version of klipper/moonraker I believe my print queue is terminating r…
-
I am trying to add some of my filaments to the list and found that the K value only goes out to 3 digits for some reason. Also the printer/extruder/toolhead should be fields also as values will be di…
-
Today, my QIDI Q1 Pro is consistently reporting the filament sensor as "Off" even though there is filament present. I used the commands ENABLE_FILAMENT_WIDTH_LOG and QUERY_RAW_FILAMENT_WIDTH to check …