-
Hi,
I wanted to ask, regarding the qucs-s HBT models, is it possible to run the simulations using xyce instead of ngspice? Every time I try to use the xyce simulator i get this error -> Netlist err…
-
Using the "-i" parameter I am not able to open files from the command line. Qucs-s opens fine, but with the default empty document (latest continuous build).
At first I though it might have something…
-
I updated all the files 9/26/24.
I'm having an issue getting three Voltage Controlled Resistor models in the link below to work in Qucs-S.
http://www.ecircuitcenter.com/Circuits/vc_resistor1/vc_r…
-
See https://github.com/ra3xdh/qucs_s/discussions/681 for context. The ideal transmission line has TRAN model. It's need to implement similar for miscrostrips. Contribution is welcome here. Could be a …
-
Hello,
I am trying to simulate frequency response of a filter with JoSIM by creating a Gaussian excitation and then doing Fourier analysis on the output. I saw that the S-parameters I calculate don't…
-
[This is an initial Flapak manifest for Qucs-S](https://github.com/tinywrkb/flatpaks/blob/master/com.github.ra3xdh.qucs-s/com.github.ra3xdh.qucs-s.yaml), not really tested except a basic simulation. …
-
Thanks to the recent hotkey fix, I eventually updated Quc-S and noticed that scrolling the circuit area suffers from a very noticeable performance drop.
This issue appears to be caused by more inef…
-
Hi, will this library add for qucs_s with ngspice ?
https://www.st.com/resource/en/spice_model/standard_snubberless_triacs_pspice.zip
-
The documentation on the https://qucs-s-help.readthedocs.io/ is totally outdated now and doesn't reflect the latest application state. This manual need to be 100% rewritten. I am planning to remove th…
-
Why can't the "new" Spice library device be used to create a Library? Whey I try to make a Library from sub-circuits made using the Spice library device, the Library was missing all the Spice model in…