-
What are exactly the radio frequencies of the "radio" module of a micro:bit?
I feel this part was not completely clear.
I am asking because I want to see if I can use a Transceiver to communicat…
-
1. Intercept CI-V frequency messages from the radio being passed through to a PC and substitute the transverter frequency. Same for PC to radio direction.
2. Add a way to use a menu and/or button…
-
**Description:**
- So i am looking for some help to make the radio frequency's stay the same after you respawn. At the moment if you change them in-game and then die the freq will reset to a random…
-
### Describe the Concept
Radio Frequency Interference (RFI) -- Radio interferences predominantly generated by human electronics and radio sources. Such interference must be dealt with in many type…
-
**Describe the bug**
We are transmitting SSTV in Martin 2 mode from an SX1268. This works as expected on frequencies below 432 MHz. Changing the frequency to anything above 432 MHz (tested up to 437 …
-
### Describe the bug
When using 40 MHz or 80 MHz band widths on a 5 GHz wireless radio, displayed channel numbers are always those of the 20 MHz band: `36`, `40`, `44`, etc.
Maybe would it be be…
Berbe updated
2 months ago
-
I have an arduino nano v3 and a RFM69HW. Everything works fine, but when I set: `radio.setHighPower();` it gets blocked when I perform: `radio.send(TONODEID,sendbuffer,9);`.
The RFM69HW is fed usin…
-
I have long wanted to ask about this problem, is it possible to make the current frequency, if it is listed in the AF list of the received radio station, appear in the list also when the AF sorting mo…
-
### Category
Other
### Hardware
Other
### Firmware Version
2.4.3.91d6612
### Description
I attempted to upgrade to this version of the firmware which seems to have been successful however the d…
-
### Category
BLE
### Hardware
Other
### Firmware Version
2.4.3.91d6612
### Description
**What happened**
1. Install new firmware (2.4.3.91d6612)
2. Open phone to pair to Heltec Mesh Node T114…