-
# Expected Behavior
`balena os configure` should allow configuring an OS image with a different, but compatible device type (e.g. OS image with `raspberrypi4-64` device type and a `raspberrypi3` fl…
-
for the above device types, rngd fails to initialise the hwrng entropy source:
```
Aug 06 14:41:01 rngd[1518]: Initializing available sources
Aug 06 14:41:01 rngd[1518]: [hwrng ]: Initialized
Aug …
-
Build of resin-raspberrypi fails on CentOS 7.1 for platform raspberrypi3-64.
make[2]: *** No rule to make target `zImage'. Stop.
zImage is not a supported Target on aarch64 linux platform KERNEL…
-
Currently, the raspberrypi3-64 image does not have the .dtb for the CM3 so does not work with compute module 3 or 3+ even with the standard Compute Module IO board or other basic compute module carrie…
-
### OS Version
Debian GNU/Linux 12 (bookworm)
### System Information
Linux raspberrypi 6.6.31+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.6.31-1+rpt1 (2024-05-29) aarch64 GNU/Linux
### What happened?
I …
saury updated
6 hours ago
-
Hi there,
i want to set up a direct wired DS18B20 temperature sensor via OWFS to HassIO.
After inserting `dtoverlay=w1-gpio` to `boot/config.txt` the device is listed at `/sys/devices/w1_bus_mas…
-
The new 64bit images are pretty cool, although I haven't been able to get them to work with OpenJDK 11 (or any JDK 11 for that matter).
Everything seems to fail with the following message:
```
qe…
-
Comparing manifests for raspberrypi0-2w-64 2.87.16+rev1 prod and raspberrypi3 2.83.21+1 prod it looks like the following are not included in the Zero 2:
```
kernel-module-bmp280-5.10.31-v7 raspberry…
-
**[Required]** Your device (RaspberryPi3, LaptopPC, or other device name): RaspberryPi3
**[Required]** Your device's CPU architecture (armv7l, x86_64, or other architecture name): arm
ありがと…
-
Errorlog:
DEBUG: Executing shell function do_compile
NOTE: make -j 4 HOSTCC=gcc HOSTCPP=gcc -E uImage CC=aarch64-oe-linux-gcc -fuse-ld=bfd --sysroot=/titania/titania-os/build/tmp-glibc/work/ras…