-
Hello,
Currently I am bench testing connecting both the raspberry pi and the RD418D radar to an ethernet hub. The plugin says
interface 169.254.37.140 error: cannot bind UDP socket to port 1.
Bef…
-
Two sample datafiles uploaded from Raymarine a-series. Contains log -data from finisch lake.
ID 26856 and 26857
-
Hello,
I would like to suggest the following feature:
UseCase:
- Sending Waypoints to Chartplotter e.g. Garmin, Raymarine, etc. from Freeboard-SK
- Most Chartplotters do only accept waypoints thro…
DrStS updated
3 weeks ago
-
Hi, I have my Raymarine (Autohelm )ST7000 autopilot connected to SignalK with NMEA2000 through a Seatalk/SeatalkNG converter.
I believe the autopilots Seatalk messages is translated to NMEA2000 us…
-
Hi, we, Hardi and I, are trying to get the NMEA2000 Data Sender connected to an A67 MFD. My understanding is, I need to let the A67 find a motor to conect the sent data to. I do not get this done. Is …
-
Can avnav send the route information out over nmea?
RTE - RTE is sent to indicate the names of the waypoints used in an active route. There are two types of RTE sentences. This route sentence can l…
-
Hi, would it be possible to have PGN130316 Exhaust Gas Temp (extended range?) support in the next release of the SK-to-NMEA2000 plugin? It seems Raymarine are supporting this now but have gone with pg…
-
Hello,
I'm fairly new to the signal K matter, and I like it a lot !
On my boat I have a setup with an Raspberry Pi 4, and a Sailor hat V2, with a waveshare 2 ch HAT attached and hooked up to my n…
-
I wonder if this plugin will work with the new NMEA 2000 autopilot from Yacht Devices [YDAP-04](https://www.yachtd.com/products/autopilot.html)?
I recently installed this autopilot on my boat but I a…
-
Navigation based on Raymarine Axiom with external receiver Raymarine RS150, connected to CPN via NMEA 2000 USB Gateway YDNU-02.
Connection in CPN NMEA2000
Dashboard displays status as on screen
![I…