-
Newbie here. I'm using an RCWL-0516 with a D1 Mini through Home Assistant to trigger a light on when someone enters a room. The issue I am having it just keeps bouncing from Detected to Clear every …
-
I am unable to find a suitable sensor that can effectively detect a moving obstacle with a broad range of sensitivity and also provide directional information, indicating whether the obstacle is posit…
-
Hello folks,
with my newest order I received six rcwl-0516 with a sightly different layout.
![rcwl-0516_new_front](https://user-images.githubusercontent.com/34582688/58596512-596e7200-826c-11e9-…
-
I'm interested in adding some parts to the subject board for my own purposes. I want to perform the layout of my new portions of the circuit that I need in order to create an entirely new board, howe…
-
I want to switch ON a MOSFET when the OUT Pin of RCWL 0516 goes High and switch off MOSFET when it's Low.
I connected the OUT pin directly to the gate of a MOSFET, but the MOSFET is not completely …
-
GPTree should start a conversation when a human shows up before the tree or passes the tree.
### Requirements:
- 2 to 8 m detections distance
- 3.3 V operation
- some RasPi code would be nice
…
-
Hello,
I'm doing a project and this is the first time I work with sensors and I have no experience.
What is your suggestion to change the sound of a buzzer, when RCWL-0516 has detected an object?…
-
Here is a nice Video about the RCWL-0516 that may be linked under "Other links, articles and contributions":
https://www.youtube.com/watch?v=IJoPkKlxFXA
-
I've mounted the RCWL-0516 on a small, solderless breadboard with a battery so it can be easily placed in different locations. It seems that the sensor's performance, that is, the trigger sensitivity,…
-
I just got some RCWL-0516 boards, I have been testing around with, but the original range is too big for my use, I need arond 2.5m, I have been trying adding a resistor into R-GN pads, but this makes …