-
I am using a small 3 watt amplifier chip to amplify the RDA5807 output to speaker level. I have found that the RDA5807 overdrives the input (only usable volume is one). I added a 10uf decoupling cap…
-
Hello.
Is there a way to implement RDS on this ( RDA5807_07_NANO_OLED_V2.ino ) sketch ?
It us good to put it instead of pin7 - bass.
Thank you
-
Hi,
I make a radio used your library with RDA5807 + STM32G030F6P6 + 128*64 LCD, it wroks. I'm very happy with it. But, I found the signal on the radio to be very poor when I use headphone for ANT.…
-
Is it possible to receive stations below 76MHz? And if no, is it ever going to be supported?
-
Hi and thank you for you useful library. I've recently installed your library and I want to use it with a SI4703 board connected to an ESP32. But when I use rx.setFrequency(), the program freezes. Aft…
-
I´m using an RDA5807FP as one possible source for audio. I´m using the I2S output from the RDA5807 and processing it to control the volume before sending it to I2S output (to a MAX98357).
I also ha…
-
Dear Wolle!
Thanks to your hard work, MiniWeb Radio is now able not only to play internet radio, but also to play files from SD card and bluetooth. Do you have any desire and possibilities to add FM …
-
I have noticed that since some time (when I started to use RDS) application hangs. It is not responsive: the LCD screen freezes and do not displays new RDS messages or do not displays current volume. …
-
Hello. Is it possible to add functions such as: getMute (); setSoftmute(); getSoftmute(); ???
something like:
RDA5807.h -> bool getMute();
RDA5807.cpp ->
bool RDA5807::getMute()
{
getStatus…
-
hi dear Ricardo and thanks for your great lib
as far as you also know RDA5807FP has I2S support
if possible please support this chip in both master and slave mode