-
I am encountering a ```FloatingPointError``` between steps 43K and 48K while training the LGR-SMoE model on the OPUS-100 dataset for a total of 200K steps. The issue halts the training process, and I'…
-
- Create 3 node cluster with rf=3.
- After reaching 90% wait for an hour.
- Now perform scale-out then calculate the time taken for scale-out operation.
- Verify the time taken for scale-out operat…
-
- Create 4 node cluster with rf=3.
- After reaching 67% wait for an hour.
- Now perform scale-in then calculate the time taken for scale-in operation.
- Verify the time taken for scale-in operation…
-
Good day @nishad2m8
I have a `360x360` round display controlled by `esp32s3` via `QSPI`.
…
-
- Create 3 node cluster with rf=3.
- Reach 90% disk usage.
- Keep it running for 30 minutes
- Double the cluster size by scale-out and wait for tablet migration
- Verify the time taken for scale-out …
-
- Create 3 node cluster with rf=3.
- Reach 70% disk usage.
- Keep it running for 30 minutes (no writes to the cluster, only read)
- Perform scale-out and wait for tablet migration
- Drop 20% of data a…
-
Create 3 node cluster with rf=4.
After reaching 90% disk usage.
Wait until cluster stabilizes
Perform scale-out by adding 3 nodes of larger instances
-
Create 3 node cluster with rf=4.
After reaching 90% disk usage.
Wait until cluster stabilizes
Perform scale-out by adding 3 nodes of smaller instance
-
* Create 3 node cluster with rf=3.
* After reaching 90% disk usage.
* Wait until cluster stabilizes
* Perform scale-out.
-
- Create 4 node cluster with rf=3.
- Reach 67% disk usage.
- Keep it running for 30 minutes (no writes to the cluster, only read)
- Perform scale-in by removing a node.