-
I have Sequent 8 multi relay board V5 that is acting strange.
The relays all cycle fine, except on a few of the relays, when I cycle them from ON to OFF, all of the other relays cycle OFF then ON mom…
-
I2C NVM = AT24C16D
I2C GPIO expander = MCP23008-E/SO
MOS for relay switch = BSS138LT3G
-
### Problem description
![Capture d'écran 2024-01-28 182343](https://github.com/zigpy/zha-device-handlers/assets/31959517/1f29a007-212b-4a03-942b-ce0f3ba54cfd)
The relay board is well recognized i…
-
The PCA9671 originally had a driver for the Iowa Scaled Engineering relay board. That specific driver was not commented and did not have a sample so it was removed. A new library with that periphera…
-
While recently working/testing the shit register implementation, thought I'd pick up a relay board to test with. I've seen other people use these as percussion and wanted to use one also.
Picked up…
-
1. Connect rain sensor and relay module to the Arduino Uno board
2. Sample Arduino script would look like the following
-
### Version 1:
- [x] - [x] Change diode footprint
- [x] Make "Port" Cables (30 pin oops)
- [x] Rename EM1-EM14 MOS1-14 or OUT1-14
- [x] Maybe just make this a 16 relay (14 with input 2 without) That t…
-
Dear, I am using a uno r4 wifi module to control 4 relays using the sinric pro functionalities.
When I compile the code (generated using the zero code in my Sinric Pro account) I get several errors…
-
Hi to everyone and many thanks for this great work, I've just a simple question, is there a possibility to use utilities keys with PAI? I've got some automations with this function such as gate open, …
-
In our motorhome we have:
- 1 * T-Relay 4 Channel
- 2 * T-Relay S3 (both with an extension board
This bug is hard to describe, but I will do my best here. The two sets of T-Relay S3 relays (eac…