-
I think it might be due to other services trying to use USB0? Is that the top left most USB port if looking at the face of the Cerbo GX? I tried the `/opt/victronenergy/serial-starter/stop-tty.sh ttyU…
-
**Software:** FreeDS v1.1.0020 Beta Build: 05042024 Web: 1.1.5
**Hardware:** PWM10A 2200W MOSFET Trailing Edge Dimmer + ESP32 with additional cooling (relay4)
Connected Temperature Sensor: DS18B20 (…
-
### Testing environment:
iroh-net version: v0.27.0
server (Linux, Windows),
client (Windows).
client is a laptop that supports both Wi-Fi and Ethernet connections.
### Result
1. When…
-
Do this:
- Turn all of the zone relays to SwitchtoScada (e.g. 17, 19, 21, 23 in oak)
- Note: the even relays (e.g. 18, 20, ... in oak) are in the open position by default, so shouldn't be changed.…
-
Working with a Dingtian IOT board DT-R004 with Domoticz Running in docker.
Installed python driver 1.3 , setup the hardware to the IP number of the board, set to 4 channels , added relay switches fro…
-
### What happened?
I have two "Aqara LLKZMK11LM (lumi.relay.c2acn01) relay" they work fine untill zigbee2mqtt version 1.40.1.
After update to 1.40.2 (tried also to update to 1.41.0) they stopped wor…
-
### Description
A simple switch button to activate "allow list only" to join to the relay.
Right now, in the relay config user can activate the paid option and in that moment only allowed / paid pub…
-
Hello, I am creating a SpanAccessory according to the mainConfig.selectedMode value in the Setup function.
When I change mainConfig.selectedMode, the other one naturally goes to "No response" in th…
-
Hey,
The [No Relay Power Monitoring EU Plug for ESPHome](https://www.athom.tech/blank-1/no-relay-consumption-monitoring-eu-plug-for-esphome) links to [wrong yaml](https://github.com/athom-tech/atho…
-
**Description**: I am currently using a Sonoff TX Ultimate (T5-4C-86, with 4 relays) configured with ESPHome. When I press any of the physical touch buttons on the device, the relays are not toggling …