-
Here a copy of my error log
2024-09-02 09:56:18.065 ERROR (MainThread) [homeassistant.config_entries] Error setting up entry Renogy Rover for renogy_rover
Traceback (most recent call last):
Fil…
-
I know in the documentation only the rover series has been tested, but has anyone been able to interface this with a wanderer?
-
I just deployed your tool as a systemd service on Ubuntu. Since I have an example, this may be helpful for others:
config file is copied to `/etc/default/renogy-bt`
service file is copied to `/li…
-
First of all a big thank you for doing the leg work! I am new to esp32 and home assistant but managed to get this operational. Use api and not mqtt in your yaml files if possible for pushing data, it'…
-
I have it working with an ESP32-WROOM-32D board and a Rover Li 40 amp SCC
-
As you asked how to discover device IDs, I ended up down the rabbit hole today, and discovered a way - the right way, I'm not sure, but a way!
Using a standard raspberry pi OS (64-bit) install on a…
-
Renogy has a series of [MPTT solar charge controllers](https://www.renogy.com/wanderer-10a-pwm-charge-controller/).
They have an RS232 port that one can hook up a bluetooth module to: the [BT-1](http…
rb2k updated
11 months ago
-
Is it possible to get any errors that the battery might encounter?
E.g. over current protection, under current protection, low temperature shut off etc?
The intention is to replace the Renogy M1…
-
### Is your feature request related to a problem? Please describe.
_No response_
### Describe the solution you'd like
It would be great if someone could add support for Renogy MPPTs, just like the …
Yoeky updated
7 months ago
-
Hello,
Currently I am trying to make this work with a test setup of the Renogy Rover MPTT 40A controller. I have only a Mighty Max 12V 100Ahr connected to Bat (+) and Bat (-). PV(+), PV(-), Load(+)…