-
Hello @cifertech and everyone!
In the 'nRFBOXv2 BOM.pdf' list, there are two types of resistors: 1KOhm 0805 and 1KOhm 0805 (2012X06L). Is there any difference between them? Can I use the 1KOhm 08…
-
![Image](https://github.com/user-attachments/assets/ab9a29f2-1904-4efa-be77-68363c1bbfe6)
Maybe an issue inside @tscircuit/core with the z position computation, if not, could be in jscad-electronics …
-
![Image](https://github.com/user-attachments/assets/92286dad-1f8d-44e8-901b-74bd511dbd60)
-
Hi,
Could you let me know the value of the pulldown resistors?
Can I use 10KOhm resistors?
Thanks!
-
Item 22: R15, R16 the value is 100 Ohm?
Items 25, 26: what is the R appended? It means just Ohms?
-
### STOP! ATS 20+ users!
The below isn't needed!
**G8PTN** has pointed out that it HAS the needed resistors already on the A1 pin of the device...
Please follow his advice, and leave your solderi…
-
The documentation of Modelica.Electrical.Analog.Examples.Resistor says
> This is a very simple circuit consisting of a voltage source and a resistor.
I don't agree with that.
Clearly the model lo…
-
## 75 Ohm Resistor (Any resistor between 50 and 150 ohms is okay)
> [!TIP]
> simulating load on one signal, without soldering, or any extra hardware. I simply insert the resistor —75 Ω is the ideal …
-
https://eepower.com/resistor-guide/resistor-standards-and-codes/resistor-values/
Some key notes:
> E***n*** means that every decade (0.1-1.0, 1-10, 10-100, etc.) is divided in ***n*** steps on a…
-
really 140 Ohm Resistor for the LED? Thats a Really unusale Resistor and hard to find.
Most sell only 130 or 150 Ohm als normal.
140 ohm as smd yeah easy to find