-
### Printer model
Prusa XL 2T
### Firmware version
6.1.3+7898
### Upgrades and modifications
Enclosure + Highflow Nozzles
### Printing from...
Prusa Connect and USB-Drive
### Describe the bug
…
-
There is something wrong with new slicing engine in version 15. Same model with same setting is estimated for 1h41m in version 14.09 but in 15.02.01 it is 1h46m. There are nearly 3.5x more retracts - …
igi79 updated
9 years ago
-
I had refactored PG's behavior w.r.t. `C-_` a long time ago (which was fairly broken before my patches)
There is a **limitation** of the current algorithm of "pg-protected-undo":
1. one idea of …
-
When I start a new print, it seems to first retract about 10-15cm of filament, so when the actual printing starts, there is no filament loaded in the hot end.
-
Hi,
I have noticed that when using post processor newer then 44115 15.03.2024 (Mach3) , Batchpost is always generating the "Safe retracts and home positioning" as G28, (even when selected G53 or Cle…
-
Have a Wizard like current Edgetx versions, which automatically programs retracts and dual rates
-
Hello!
### Version
2.3.0
### Operating system type + version
Gentoo Linux
### 3D printer brand / version + firmware version (if known)
MK3 3.8.2
### Behavior
In curved perimeters, cert…
haarp updated
3 years ago
-
### Is there an existing issue for this problem?
- [X] I have searched the existing issues
### OrcaSlicer Version
2.2.0
### Operating System (OS)
Windows
### OS Version
Windows 10
### Addition…
-
### Describe you new feature you'd like
First of all, thank you - mega project!
I have a sloping roller shutter which is controlled by the buttons on the controller.
Means button up - the shut…
-
I have attempted to install a MicroProbe V2 on my Octopus Pro V0 board running Marlin Bugfix 2.1.X, but I can't get it to work. I'm sharing a video of the issue to see if anyone can tell me why this i…