-
Explain how to go from frequency selective to slice selective RF pulses
Describe Multi-slice imaging
-
I have a problem to get code from rf remote. I got code when pressing button:
```
pulses: 50 possible protocol: arctech_switch_old
pulses: 50 possible protocol: arctech_switch_old
pulses: 50 pos…
-
Hi
When I send a few (about 10) MQTT messages to turn off different ligthts on a short-term, my esp8266 stops responding. I get a temporary ping time time out and some of the RF pulse are not being…
-
We have determined that there is strong coupling between single pulse TMS (with a biphasic pulse of 250 usec duration) and a receive-only RF coil when the RF coil is receiving signal, i.e. there is a …
-
My city water meter RF module was recently replaced with an "Orion Endpoint."
I had been able to receive and decode readings from the old module using -R 223, but that's no longer the case.
I'd li…
-
protocol.md mentions that the format for sending signals with broadlink for IR is pairs of on/off durations, however for RF this does not seem to be the case. With my RM4 Pro and observing with a rtl-…
-
Hello :)
First, nice and simple yet efficient repository! This repository is exactly what I was looking for: an user-friendly and simplistic pythonic implementation of the MP2RAGE T1 mapping techn…
-
### What happened?
Hi,
I would like to create a simultaneous multi-slice (SMS) example for a course.
First, I created with pypulseq a standard Multi-slice GRE sequence with long TR=1000ms in or…
-
Hello, thanks for your work on this library!
We have 3-button Sonoff T2EU3C-RF and it's working only partly:
- left button not detected
- center and right button detected as:
20;CE;Eurodomest;ID…
-
I tried receiving rf signals from a sensor of an Alecto WS1100 weather station, but the signal is not display in the serial monitor.
I can receive the code with this rf sniffer: https://dl.dropboxus…