-
The data received by the wireless module is not as expected. I name a certain data transmitter that sends them once every 10 seconds. The data contains 6 integer numbers. The problem is that on the re…
-
i have 1 master and 3 slaves with rf24 what can i use to make it work (0-: ?
-
Hi @tenbaht or anyone who might be interested in porting this library. Since I'm not skilled/experienced enough to archieve this on my own, I thought it might be worth putting it here. With this libra…
-
Im an arduino user, diving into the depper lever of embedded, and would be useful to have the most common radio module support, the nordic rf24l01.... I hope I've helped!
-
Well, I guess it's debatable but in short the datasheet for the nRF24L01+ says that data should be clocked over the SPI bus LSByte first. However [this is not what RF24 does](https://github.com/stanle…
-
- 24L01+ auf RPi zum laufen bringen
- Biblotheken installieren
- kleines Python Bsp
-
I'm using your code with my RPi 3 (OS: Raspian) and I got problem when running this code:
```
rf24 = new RF24((short) 22, (short) 8, 32);
rf24.setPayloadSize((short) 128);
rf24.begin();
rf24.setRetri…
magx2 updated
4 years ago
-
Hi,
I am not able to send or receive anything.
```
var rf24 = new nrf24.nRF24(19, 0);
rf24.begin();
rf24.config({
PALevel: nrf24.RF24_PA_MAX,
DataRate: nrf24.RF24_1…
-
Hi maniacbug,
I have set the nRF24L01+ module power output using this code: radio.setPALevel(RF24_PA_HIGH);
When I then check this using radio.printDetails(); I get Power = LA_MED
Also I believ…
-
Hi,
I've hit several compilation issues. I was able to workaround those that required removing the relative paths in "#include" statements and a casting of a "const" parameter, but I'm quite lost a…