-
Hello,
nemrég került a birtokomba egy wiegand reader.
(Rfid + keypad Aliexpressről)
Esp8266-al próbáltam a kódod, majd csak simán a könyvtár wiegand teszt fájlját, de nem mutatott semmi kommunikáci…
-
I made this project on a wemos d1 with build 1.0.2 and a wiegand reader.
It works very well.
Only after about 4 weeks The wiegand reader is no longer reading.
The webui still works and with a reboo…
-
So I have successfully gotten leosac to run, but now I have my reader wired up to it (I'm using a UHPPOTE wiegand RFID reader) with the data wires connected to my GPIO pins through a buck converter fo…
-
I noticed in your keypad code (src/rfid.esp line 41), you are only accepting 26 and 34 bits, otherwise it is a keypad entry. It would be nice to also add in 32, 35, and 64 bit options too. Maybe have …
vrelk updated
4 months ago
-
I don't know if you have seen this one. It's much better pinout. Suitable for RC522 and other modules.
> ESP-RFID Relay Blue Board
>
> Because it was often requested, we made another version. Mu…
-
Continued thread for RFID keyboards, issue #4
https://github.com/paulo-raca/YetAnotherArduinoWiegandLibrary/issues/4
We have found that the code that we last worked on 3 months ago does not work …
-
Hi,
I have gotten a uhf rfid serial based on your documentation i have gotten a same one in the following link,
https://www.aliexpress.com/item/UHF-RFID-card-reader-6m-long-distance-range-with-8db…
VanQz updated
6 years ago
-
Hello,
i tried a new installation of ESP Easy (mega-20230409) to connect a RFID Reader with WemosD1 to FHEM over WiFi.
If i put the Tag in front of the Reader it Beeps and the Wemos sends the ID -…
-
hi folks!
direct (no downshift)
gpio 0 = w0
gpio 1 = w1
GND united
hikvision DS-K1101MK reader in mode 34 wiegand , uses mifare ultralight rfid, always receive 52 bit data (stable same but n…
-
I have a modified [Interrupts sketch](https://github.com/paulo-raca/YetAnotherArduinoWiegandLibrary/blob/master/examples/interrupts/interrupts.ino) uploaded on an ESP32-EVB which is connected to a Bos…