-
Following up on https://github.com/adafruit/circuitpython/issues/7830
Is there any interest in creating a new library, say, Adafruit_RFM that combines the Adafruit RFM69 and RFM9X libraries since mo…
-
Is there a version for this for RFM69 ? I downloaded the files and ran the script in terminal with RFM69 connected but I got "No hw id" error
-
I am starting to RFMifying my HR20s and was running into the issue, that it has become more and more difficult to acquire RFM12-modules directly in Asia, as the manufacturer has ceased production of t…
-
### Discussed in https://github.com/SpenceKonde/ATTinyCore/discussions/807
Originally posted by **stevensarns** September 15, 2023
Hello & thanks in advance for any help. I am having a proble…
-
After having tested multiple radio configurations, the best range I seem to be able to get is ~10 ft between two Teensy 4.1 boards communicating via the 433 MHz Adafruit RFM69 transceiver radios (See …
-
Hi Guys
During this ["Data loss due to RF packets getting corrupted"](http://openenergymonitor.org/emon/node/10900) discussion on the openenergymonitor forum, I learn't about the ["// FIXME doesn't s…
-
Just to mirror our previous discussion on ebid :
Your StableNode can handle 5V on his pins and not this one, but it's only available for nrf24. It could be a nice feature to nicely integrate 5V sen…
-
In the lowPowerLab rfm69 Arduino library they support sending to a specific address:
https://github.com/LowPowerLab/RFM69/blob/master/RFM69.cpp#L288
Would this be appreciated in the node library? If …
-
Hi,
in the PDF with the Feather M0 RFM69 pinout, the IRQ pin is wrong.
When looking at the schematic, I see that the IRQ should be on pin 3, a.k.a. PA09
-
Bin bei Recherchen auf ein fertiges RFM69-Modul für den RPi gestoßen:
http://www.seegel-systeme.de/produkt/raspyrfm-ii/
Wäre es es nicht möglich auch für UniPager das RFM69-Moudel direkt über den SP…