-
I've added node-red-contrib-rfxcom 2.13 to my Palette in NodeRed (Docker on Raspberry Pi).
When trying a simple flow (rfx-sensor to debug) and configuring rfx to /dev/ttyUSB0
my nodered container in…
-
Hi, thanks for your great work.
On a fresh new install (git clone) when i try rfxcom-rx, i ve got some weid values (i have some oregon sensors and X10 ms13)
giejo updated
10 years ago
-
Hi Maxwell,
I'm having trouble getting **node-red-contrib-rfxcom 2.13.0 to work with the rfx-blinds-in and rfx-blinds-out nodes in Node Red (versions 3.0.2 or 3.1.7) on a Pi4.
1. Bert Weijenber…
-
2017-01-03 23:18:45,675 domogik-rfxcom INFO The client is configured. Continuing (hoping that the user applied the appropriate configuration ;)
2017-01-03 23:18:45,675 domogik-rfxcom INFO Retrieve th…
-
Hi,
Using an RFXCom RFX433XL Wifi and get the following error when installing the binding:
The firmware type reported (20) isn't known to the RFXCom binding. Please raise an issue at https://git…
-
### The problem
As of yesterday it appears that "RFXCOM RFXtrx" can no longer start.
Stupidly the first thing I tried doing was upgrading HA when I had the issue, I believe I was on 2024.2.1 thoug…
-
Would it be possible to have RFXSensor added to the RFXCOM binding please?
Thanks
Colin
##
-
Hi all,
first of all i'd like to say hello and thank you for your patience and help in advance! It's a great pleasure to see all the inventions and ideas you serve to other users!
I'm a beginner…
-
**Describe Your Problem:**
I can't set up my blinds. I try multiple things and I always the message "device type is unknown"
**Logs:**
Homebridge v1.6.0 (HAP v0.11.0) (RFXCOM) is running on…
-
## Expected Behavior
I have firmware version 1045 and hardware version 3.1
## Current Behavior
2022-06-26 21:59:29.564 [WARN ] [rnal.messages.RFXComInterfaceM…