-
### The problem
As described many times before the rfxcom integration refuses to start if you restart HA, claiming it can't connect to the USB device
### What version of Home Assistant Core has the …
-
Try to control a 433MHz wall plug with the rfx-light node.
But the rfx-light node will…
-
HASS IDs generated for MDREMOTE V106 / V107 (Lightning 5 tab in RFXMngr) result in an error and cannot be added to the configuration:
$ generateId.py -t Lighting5 -s MDREMOTE -p 37191,1
Result:…
-
At the moment the home-collect command only supports collecting data from the rfxtrx. This is limited and it should either be renamed to make the purpose of the command clearer (home-rfxtrx home-colle…
-
Background: The mode of the RFXtrx is used to enable and disable different protocols and/or manufacturers. Therefore, we need to make sure the protocols we are using are enabled. The `status` packet r…
-
Hello,
depuis le 20 juillet:
{"status": 2, "version": "1.0.3", "erreur": "Identifiants incorrects"}
et
2021-07-22 17:23:42.750 Error: DL2: (DL2) ----> Line 96 in '/home/odroid/domoticz/plugin…
-
I am currently using an RFXtrx with homeSeer,. But I would like to replace HomeSeer ith Homey.
I have a number of RF devices listed as Input and OUTPUT devices in RFXCOM and a number of security se…
-
My Hasta blinds does not work perfect.
When configuring output node, the methods to choose from is up/down/stop. None of those works.
If I instead send msg.method turnon or turnoff, it works.
…
-
### Checklist
- [X] I have updated to the latest available Home Assistant version.
- [X] I have cleared the cache of my browser.
- [X] I have tried a different browser to see if it is related to my b…
-
Pour mes prises Cora PHENIX à base de PT2262, il faut que j'active le Lighting4 sur le rfxcom si je veux les recevoir et dans ce cas j'ai des trames comme
------------------- ON ----------------------…