-
Hi
just wanted to add, RGBW leds are working too, like this:
```
colors:
- rgbw_color:
- 200
- 0
- 0
- 100
brightness: 155
```
however, the icon color does n…
rbhun updated
2 weeks ago
-
I was playing with rgbw leds, using the existing `ws2812` driver. It turned out to be quite easy, instead of writing the GRB bytes, I needed to write a 4th W byte. So, what might support for this loo…
-
To this point, the system supports only RGB LEDs.
RGBW+W / RGBW LEDs support is necessary.
This may require changing microcontroller from ESP8266 to something with more GPIO (ESP32?)
-
Hi,
I recently bought [these sunset lamps](https://www.amazon.com/dp/B0BRN1C6M8?ref=ppx_yo2ov_dt_b_fed_asin_title) from Amazon, which are powered by Zengge.
I’ve tried everything, and so far, th…
-
A small request if the function could be extended to support RGBW LEDs (with a additional white LEDs).
Maybe I have overlooked the possibility to handle it with the existing code, but I don't think s…
-
I am running into an issue where after upgrading the ESP32 package from 2.0.17 to 3.0.x, Neopixel sketches with an LED count of 76 or more get into a crash loop
I am using the Adafruit_NeoPixel '[s…
-
**Is your feature request related to a problem?
Yes
Normally in XLights I can save a sequence with the "String Type" as RGBW, and "RGBW Color Handling" to either one of the RGBW settings (I typica…
-
### What would you like implemented?
Would it be possible to add support for RGBW LEDs? i cannot specify white channel used in for example SK6812 for higher brightness.
Or even better, just option…
-
### What happened?
Main issue
Controlling the RGB LEDs with LED driver 5110.40 (iluminize.js) is working fine but it's not possible to control the white LEDs of the RGBW LED stripe. The white LEDs…
-
For home automation purposes it would be great to have the possibility to convert a color not only to R, G and B but also to a red, green, blue and white component. Probably even to two different whit…