-
Currently we do not handle RN2483 errors at all in the firmware, except logging to serial, leading to a dysfunctional sensor in the field.
Maybe it would be enough to send a reset to the RN2483 after…
-
I've heard someone complain that the RN2483 can get stuck. Not sure if that's true, but it might be good to connect the reset pin to the microcontroller, just in case :)
dbrgn updated
6 years ago
-
Hi,
Thanks for the cool product.
Interesting thing to test, but I was not able to get proper data from RN2483.
I am sending this data to the modem:
```
mac pause
radio set mod lora
radio se…
-
The RN2483 sometimes does seem to hang.
It is very hard to reproduce, but when it happens, each attempt to send data (Delay queue C018) takes roughly 2 seconds, while it normally would only need 60 m…
TD-er updated
4 years ago
-
I have used ESP32 and RN2483 for my lora project. When I changed the PIN set of my ESP32, I upload the program 'ESP9266-RN2483-basic.ino'. But it said that connection unsuccessful and power cycle on t…
-
I assume [the `badger_read_vcc_mv` function](https://github.com/nasys/badgerboard/blob/a2b1dfe1d00efa44664a8a5b05fd8074b4d61771/src/badger.cpp#L733-L758) is measuring the LiPo connector (which I canno…
-
Hi Dylan,
I really like you project.
I wonder is f you know about mysensors, they have an API for the Semtech RF95 Lora chips.
I found your project because I was looking for a way to integrate myse…
-
Test whether ADR works. Maybe we need to wait 2 seconds before sending the RN2483 to sleep.
dbrgn updated
3 years ago
-
I believe that the decoding using SF12 is not successful. I am testing the code using RN2483 (waspmote module from libelium) and SX1276 with an arduino. Is there any known problem?
-
I sometimes experience that the LoRa module(RN2483) does not send anything back after a sendBytes. The current implementation will wait forever until a return signal is send. This will result in deadl…