-
I'm looking to have a go at connecting an Robomow trough wifi.
This seems quite ok, but i'm more of direct connection approach.
I'm going to interface directly with the RS232/service port of the R…
-
Hello, thanks for posting this. I have it running but I'm a little confused on setting it up with Home Assistant.
I already have a customize.yaml can I add the contents of your robomow.yaml to my fil…
-
I installed the firmware and configured the serial and SSID but when activating the BLE it says this version of the firmware does not support your model. I have a RT 300 and the firmware is 1.77 is sa…
-
I believe the serial number SSID needs to be entered as "Mo****". Mo plus the last four digits of the serial number. Is yours that same? If so can you update the instructions.
Also for North American…
-
Hi,
I'm trying to repair a Robomow RM510, and your schematic is a huge help.
My question is, how did you enter into the service menu to test the motors? It ask me to enter a 5 digit password.
Tha…
-
I'd be happy to support with testing if that is the case.
I've got a RS625 (2017 model).
-
Hey @MortenVinding , finally and and running, i see all kinds of stuff now in the tabs of the webportal
Only the buttons to start the mowing are not working? wjat am i missing? when i press the mo…
-
I installed the app on the android device and cannot seem to telnet to port 6000 (connection refused)
all the other opened ports on the device work on telnet for the android.. so i dont think its a…
-
Hi and thanks a lot for the effort in trying to get an interface to the Robomow!
I was very happy to learn that you already wrote some code for NodeJS, which I discovered after trying to convert th…
-
I have a few WROOM and esp32-pico cards, but this firmware is only supported using a WROVER card. Does anyone know if other cards besides the LOLIN D32 pro cards can be used?
My older RC-model does…