-
Add a RJ45 connector into a case for the flying RockMite. Bring that down (via CAT5) to the keyer, headphone, and battery box (?).
Add the same connector to the desktop RockMite to use the same ke…
-
Background:
In the spirit of @simonw 's DjangoCon presentation
https://youtu.be/GLkRK2rJGB0
I'm turning the Rockmite into a github project. The first issue is being able to unit test. This will b…
-
Find raspberry pi with WiFi.
Setup server to interface across WiFi service vnc-like or not even that? Just ip address of the day and port?
Attach to keyer/audio ports of RockMite
-
This will enable tracking the progression of the maximum usable frequency vs the QSOs/spots from the Rockmite.
-
Probably using the existing two mounting holes, move the breaker board inside the RockMite enclosure. Simply notch the side of the box to bring in the connector. Maybe slide the mounting holes over a …
-
Widen the search criteria back up to 'kd0*' then add filters that search through RBN spots that match kd0* based on the known the frequencies (about 8 of them) the [Rockmite](https://github.com/hcarte…
-
Perfect antenna placement at Noisebridge using a variant of the Flying Rockmite.
-
Not so much an issue as a proposal. Could the standard also include a pinout for a CW keyer rather than a mic? Folks might like, (I suspect very much), to bring their own keyer as well.
I've built …
-
Use an automted Morse code decoding software package to listen for the Rockmite on the [Utah SDR](http://websdr2.sdrutah.org:8902/index1a.html). I'll also need to determine how to do a better URL auto…
-
Record the Rockmite as the sun crests over the trees in McLaren Park. I heard a wave of static yesterday. The issue here is to determne if the phenomenon repeats and is related to the sun. On 1/1/23 i…