-
> Hi, I am using SPID RAS rotator and I believe I'm having the same issue. I'd need to slow down the polling of position. I've tried querying position via rotctl manually during an observation and som…
-
Hello, i am using simple antenna rotator https://www.sarcnet.org/rotator-mk1.html
which support serial control or `rotctld`. Is possible to add antenna tracking to SW ?
2 ways are possible connect s…
-
I have lately been using GPredict to control a rotator via rotctld.
Rotctld is started as a dummy rotator (rotctld -m1 -v), to which I connect GPredict with the default configuration. Then I ran ot…
-
When activating a task, the command sent is not receiving anything back leading to temporarily unavailable.
SDRPP output:
```
[2023-05-23 13:16:22.936] [info] GsmRotatorController::sendCommandToR…
-
Add an option into the config to define that a rotator is azimuth-only. If this is enabled, only send azimuth data.
-
Greetings,
I was asked to help a local high school / technical center pre-engineering team obtain balloon data and provide it to their project via a USB serial port. They built a pointer that point…
-
Often, users request support for making tracking data avaialble through a more versatile interface than what is currently available through the rigctld and rotctld interface. We could use the EasyComm…
csete updated
3 years ago
-
Rotator azimuth positions for `rotctld` are specified in coordinates that go from -180.0 deg (due south) to 180.0 (due south again) in a clockwise manner.
90 deg is EAST.
-90 deg is WEST.
Curre…
-
I am working on a antenna rotator that acts as a `rotctld` server. I have gpredict controlling the antenna now and I was wondering if we could have a park button and maybe a parameter set field to spe…
-
Dear Gpredict Team,
I would like to submit several crash of Gpredict when AOS is 00:00 and satellite EL is -0,00°.
Gpredict run with rotctld.
Gpredict version is win32-2.3.37 (on Windows7).
In…