-
hey there
i'm using rpi computer module
does any one test this library with rpi cm3
or it will work ?
-
Support for prebuilt RGB LED panels that utilise the [https://github.com/hzeller/rpi-rgb-led-matrix](https://github.com/hzeller/rpi-rgb-led-matrix) libary would be great.
-
im really sorry, but not know how to install on raspberry pi zero 2w :( any help please (im so lost)
-
Hi Henner,
I just want to report that running your library on picore results in a perfect frame. No flickering or artifacts.
I had previously tried with raspberry-stretch lite and the realtime …
-
I was looking into the code for possible points of concern. To me this looks like a possible deadlock which results in a stall of the high priority thread. The front ground thread is capable of acquir…
-
I have an Adafruit RGB Led Matrix, 64x64 P3, and I'm using the Adafruit HAT. I'm running the program on a Raspberry Pi Zero and having difficulties with the mapping, which seems to be incorrect.
This…
werls updated
4 months ago
-
When I try to make the video-viewer in utils after installing dependencies as mentioned in utils readme it shows error and not getting build.
please help out...
error details are given below...
…
-
The error is
> Error: /home/pi/node-rpi-rgb-led-matrix/build/Release/node-rpi-rgb-led-matrix.node: undefined symbol: matrix_hardware_mappings
Any ideas?
-
Hi,
I recently purchased a P2.5 64x64 outdoor LED Panel https://www.aliexpress.com/item/1005005908894934.html
and the led-multiplexing doesn't seem to work for the 1/16 Scan.
I have an indoor P…
-
i am using P10-3535-32x16-4s(AHH). we have raspberry pi 3 b+ and hub 75. if i connect only one led module and run sudo ./demo -D 0. code is working for one half module . another half is full blur led.…