-
### Checklist
- [X] I acknowledge that support is provided on a best-effort basis.
- [X] I acknowledge that the authors and contributors to this repository cannot be held responsible for the results …
-
Any chance we can get a rev of the rpi0 with waveshare 2.13" e-ink with the pisugar3?
-
Hi Folks,
I'm having issues installing pyindi client on a RPi0, Here's the log. It shows that it falls back to python setup.py install, which also fails. Any thoughts?
I've had to truncate the …
-
Can someone make an in-depth video on setup, and installation? The tutorial seems dated, I have had no luck following the wiki. I have a raspberry pi zero w, with June 2019 Raspbian loaded. Might even…
-
Instructions on how to work with this tag were not working for me. I changed tag as suggested to rpi0_2 in command line and withing mix.exs, but somehow had issue with `mix firmware`.
In my mix.ex…
-
hi i tried the rpi 0 w image but it doesnt boot on rpi0 2w. is there anything need to be done to make it work
-
hi,
I'm trying to connect a raspberry pi 0 (which the screen is connected) to an Android box where Klipper/moonracker/octoprint are installed. The screen lights up with the logo but run.py returns th…
-
I am trying to verify the test results of the Raspberry Pi Zero W as listed in the table under the [Raspberry Pi section](https://github.com/google/XNNPACK#raspberry-pi) in the [README.md](https://git…
-
For some reason, the script fails on connecting to PI0.
When I try `screen /dev/ttyUSB0 115200` after a few seconds I can see login and password quickly passing through the screen. Any idea what is w…
-
Just a note to myself: I need to try it using the new RPI0 2.