-
Hello @SvenVD,
As I posted about before and you are aware, I've been having some camera freezing issues with RpiSurv on a Pi4B 2GB that could be related to the GPU getting overloaded or possibly …
-
Hi Guys,
is it currently possible to play a stream with Bullseye or should we better keep Buster? Following some logs:
Nov 16 18:45:07 rasp-bullseye rpisurv[592]: [hevc @ 0xaa800b10] hardware a…
-
Hello,
cat /etc/os-release output below;
PRETTY_NAME="Raspbian GNU/Linux 10 (buster)"
NAME="Raspbian GNU/Linux"
VERSION_ID="10"
VERSION="10 (buster)"
VERSION_CODENAME=buster
ID=raspbian
I…
iTrim updated
1 month ago
-
Hi,
I just installed 2022-01-28-raspios-buster-armhf on a RPi4, followed the
gpu_mem=512 to your /boot/config.txt
framebuffer_width=1920' and 'framebuffer_height=1080
The demo boots fine and …
-
Hi @SvenVD, hope this finds you well.
I was wondering if aside from manually specifying RTSP streams, for those of us that use the Ubiquiti UniFi Protect cameras, there could maybe be a way to have…
-
Hi
im getting this error RE VLC on install
```
Your version of vlc does not have the needed mmal options. Rpisurv needs those
Minimum tested vlc version for Rpisurv is (VLC media player 3.0.1…
-
To my surprise after having no, no no success with Buster over several hours of work, because never versions of VLC do not have the mmal module in Buster's repository, rpisurv works here under 32bit B…
-
Getting this error on install.
pi@raspberrypi:~/rpisurv $ sudo ./install.sh
Use this installer on your own risk. Make sure this host does not contain important data and is replacable
This install…
-
Hi,
On my raspberry pi 2 I got 100% usage of one core when trying to display an image.
For example the following command` cvlc https://images.rpisurv.net/example.png`
Is this a bug or is ther…
-
On a fresh install of bullseye (Raspbian lite) We loaded [the snap](https://snapcraft.io/install/vlc-pi/debian) and were then able to install rpisurv 3 from git.
```
sudo apt update
sudo apt instal…