-
### System Health details
## System Information
version | core-2024.9.3
-- | --
installation_type | Home Assistant OS
dev | false
hassio | true
docker | true
user | root
virtualenv | false
…
-
hi all, i used the firmware version alpha 3.2.47, in that cant able to enable (tx enable) in the pin assignment preset... can anyone suggest idea for this pin to enable to work for wifi to 485
-
### A clear and concise description of what the problem is.
hi! I tried to connect PowMr POW-SunSmart 12KL3 with 2 different types of RS485-to-TTL (especially with MAX485 as on the picture with sam…
-
### Current Situation
This project looks super cool. I would like to build this, and am trying to find the best ESP32 dev board that already has the RS485 chip, and maybe power regulation, etc. I …
-
Hi Jack.
Finally got the cable connected, but cannot seem to successfully connect. Had left the prolink module and thought it was causing a conflict, but same issue when I removed it.
Had insta…
pddc updated
7 months ago
-
Hi,
This hardware configuration is possible with this code ?
```
RS485 devise IN/OUT -> ESP1 ----> wifi ----> ESP2 -> RS485 IN/OUT
|
| modb…
-
Aqualinkd is running well. With the Aqualinkd Management Console, I have noticed an increase in checksum errors and bad packets. It does not seem to interfere with the operation.
Under v2.4.1 …
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### I'm having the following issue:
I get a ‘No devices found on the network’ message when I try to add the …
-
Hi everyone,
I'm having a very weird problem using the RS485 to TTL Converter and the M5 atom.
Whenever I plug the device with the usb it immediately connects to my wifi.
But, when I power the d…
-
Just wondering a couple of things:
1. Will this work with non Balboa RS485 to WiFi options like the 'Elfin EW11'?
2. Is this the same code that is integrated into the HomeAssistant Balboa integr…