-
目前action.yml 中对所有action中的bsp都做了scons检查,大家觉得,是不是提交的bsp没有对一些I2C 或者SPI 等做编译检查呀?会检查到吗?
- [ ] 根据修改的文件的目录寻找需要详细检查的bsp
- [ ] 对该bsp进行检查I2C, SPI, PWM , ADC, DAC 等其他驱动的编译情况。
-
https://www.stm32duino.com/
https://github.com/stm32duino/Arduino_Core_STM32
-
- [ ] 支持多核[诸]
- [ ] 测试PIN设备的软件包。可以搞个软件包测试多个设备,两个PIN设备相互测试一个INPUT 一个OUTPUT
- [ ] 用MCU内部两个I2C测试I2C设备的软件包,一个MASTER 一个slave,不同波特率,不同setting
- [ ] 用MCU内部两个SPI测试SPI设备的软件包,一个MO 一个MI 不同波特率,不同setting
- [ …
-
you can use the STM32 board of you to finish this "good first issue"
if there's no board in "bsp/stm32/",
you can create the bsp with docuement [How to make a STM32 BSP for RT-Thread](https://githu…
-
以PWM为主:
- 确保PWM在上电之后是可以正常工作的
- 如果SPI没有的话,是可以接受的
- 如果对接了SPI,只有在SPI.begin时才会switchToSPI
- 一旦切到SPI,就不会再切回PWM,用户不可能同时使用SPI和PWM
https://docs.rtduino.com/#/zh/manual/api/api-notice?id=_14-pwm%e…
-
![image](https://github.com/RTduino/docs/assets/34888354/22510de2-0910-4c32-a409-1e4f115a33a8)
-
## 一期目标
- [x] GPIO (数字输入输出)
- [x] ADC (模拟输入)
- [x] PWM (模拟输出)
- [x] 串口输出
- [x] Arduino通用算法库可以100%兼容
- [x] 整合RT-Thread debug输出
- [x] 软件IIC框架整合到Wire.h (未实现从机部分)
- [x] 对接Adafruit_Sensor和Adafrui…
-
I am using the Renesas RA6M3 HMI Board, which is currently supported by RTduino. However, after I enable the RTduino on the RT-Thread settings, I cannot build it due to linker script problem…
-
env使用的python版本为2.7,且在setting中似乎没有自行设置python路径的选项,请问如何解决?
需要解决这个问题是在env中执行pip install toml出错,推测是python版本原因。
![image](https://github.com/RT-Thread/env-windows/assets/56765592/4a2cbe7d-1078-4eba-ad…
-
RTduino需要做临时修改:
```diff
diff --git a/core/Arduino.h b/core/Arduino.h
index d1f81db..6f97cf1 100644
--- a/core/Arduino.h
+++ b/core/Arduino.h
@@ -104,10 +104,10 @@ typedef uint8_t byte;
/* math…