-
PVE 8.2 changes their default kernel to 6.8, which makes my network down. After
upgrading r8125-dkms to 9.013.02, there is still lots of errors show on my console, like:
[353.459395] r8125 0000:…
Vohrt updated
3 months ago
-
https://www.realtek.com/zh-tw/component/zoo/category/network-interface-controllers-10-100-1000m-gigabit-ethernet-pci-express-software
大佬更新一下
-
How does one do the debian equivalent of "ethtool -s interface wol g" to enable the wol flag on bsd?
ifconfig INT wol
or
ifconfig INT up wol appears to have no effect as far as enabling wol.
…
-
Hi first of all great turotial and great job. I finally manage to shared the igpu to my vm, but I got some questions to ge cleared out. Before that here is my setup details
**Host**
```
Hardware:…
-
(This issue has the same purpose as [the issue in aq1111](https://github.com/bb-qq/aqc111/issues/79). Even though the hardware is different, the report will be helpful to you.)
I've decided to star…
-
When doing iperf3 line speed tests, im seeing very high cpu in proxmox host top with the above nic and stock (kernel?) rtl8125 driver.
According to lspci it's using the r8169 driver.
Will instal…
-
是直接运行 apt install ./intel-i915-dkms_1.24.1.10.240110.1.nodrm+i1-1_all.deb , 它就会安装好所有依赖和驱动 ,
然后在 /etc/kernel/cmdline 加上 intel_iommu=on iommu=pt i915.enable_guc=3 i915.max_vfs=7
然后 proxmox-boot-tool…
-
### Describe the bug
r8125 cannot auto-negotiate 2.5G!It can only auto-negotiate to 1G. You must use the command, `ethtool -s eth(*) autoneg on advertise 0x80000000002f`, to negotiate to 2.5G!
### O…
-
**Describe the bug**
I added the NIC (RTL8125B based PCI-E card) to the harvester. After booting, I am unable to access the Harvester Dashboard - I only saw the the following info: `Handler disconnec…