-
Hi, on what router did you use it ?
-
Am I right in thinking the non-Chinese version of the M2 is now supported by this? I'm a little confused by the instructions page, do I need to do a UART flash of it to get it working?
-
Even though it's said to be incompatible with EU version of M2 gw, I still managed to flash the rootfs using the Chinese modified ver. Result as below.
![1](https://user-images.githubusercontent.co…
-
```
C:\WINDOWS\system32>"C:\QGB\software\ssh\MobaXterm Professional 10.4\MobaXterm\slash\bin\telnet.exe" 192.168.88.254
Trying 192.168.88.254...
Connected to 192.168.88.254.
Escape character is …
-
Hi! Could you please also upload the bootloader for the M2 EU version? I flashed my device with https://github.com/niceboygithub/AqaraM1SM2fw/blob/main/raw/bootloader_1.0.0_0001/bootload_1.0.0_0001.bi…
-
Have an M2 hub (stock firmware) and trying to flash 3.3.9_0013.0616_modified.bin using aqaragateway.exe
It shows a progress bar for "Downloading the flasher" (and TX lights up on the TTY USB) but o…
-
Hey! Thanks for your hard work. I have Aqara M2 CN hub and successfully flashed 3.3.4 modded firmware through UART. But after couldn't get telnet access anyhow.
Putty and other tools always immedi…
STUkh updated
2 years ago
-
Hello, I have used the wrong tool (gateway3utils.exe) to flash the firmware of M2, which resulted in the loss of data partition files. Is there any way to restore the data partition?
z-x-f updated
2 years ago
-
nodogsplash runs on OpenWrt 14.04, I tried to let a MAC visit Internet freely. I type the following command, all of them are failed.
```
root@rtl819xd:/# ndsctl trust 6a:4d:ac:26:b1:bc
Failed to tr…