-
### The problem
When trying to compile a Generic - RTL8720CF (2M/992k) board with the default yaml from the UI I get the following error when trying to build:
/data/cache/platformio/packages/library…
-
Dear Sir,
I'm currently developing with the BW15, but I'm unable to use the standard Arduino BLE library. How should I proceed?
Nathan Kuo
-
I ran a `strings` on the `U-WB05RT13V1.21-4307516678339185323.bin` file, and I came across this:
`../../../component/common/drivers/wlan/realtek/src/osdep/lwip_intf.c`
Which is actually this fi…
-
Is there support for RTL8710CM yet?
I have a couple of devices (Tapo L920 LED controllers) using this chip and would love to be able to flash them with libretuya/esphome.
-
There are a some issues I encountered when coding for wb3s and wbr3 chips (using the feature/realtek-update branch for wbr3):
- WiFiClientSecure doesnt work at all for any of the chips.
- When usi…
-
My Midea dehumidifier came with a WiFi dongle, the case reads `EU-SK-105`.
It has a USB connector, but the data lines are just UART TTL lines to another board. Those are apparently 5V.
It's rather…
dhewg updated
8 months ago
-
Dear all, I have a thermostat BOEK [TOL47WIFI](https://www.beok-controls.com/Content/upload/PDF/2021837153/TOL47-Heating-Thermostat-Manual.pdf)-EP with a [WBR3 ](https://developer.tuya.com/en/docs/io…
-
Hi,
I have a device that I will like to flash with OpenBK firmware.
On my Ubuntu I have downloaded ltchiptool and did:
`python3 -m ltchiptool uf2 write -b cb2s -o openbkt.uf2 OpenBK7231N_1.17.…
-
I have been testing the i2c (Wire) implementation for BK72XX chips (so far so good BTW just jamming it into ESPHome i2c component) and wanted to see if I could get SoftWire working on a Temperature-Hu…
-
![Снимок2](https://github.com/libretiny-eu/libretiny/assets/64173457/5bb96765-caf5-4997-a5f3-b9ecdc0429d5)
read:
512 b - ltchiptool_ambz2_2024-01-03_15-34-57_efuse.bin
2 097 152 b - ltchiptool_ambz…