-
Any chance for adding RTL8811cu/RTL8821cu support ?
Bus 001 Device 008: ID 0bda:c811 Realtek 802.11ac NIC
https://github.com/brektrou/rtl8821CU.git
-
Hello i have installed the driver it works just can't intercept Handshake, Evil Twin attack also does not work =(
Interception of traffic itself does not work at all, if there is protection, can it b…
Uefi1 updated
3 years ago
-
```
$ make
make ARCH=arm CROSS_COMPILE= -C /lib/modules/6.1.21-v8+/build M=/home/pi/RTL8811CU_for_Raspbian modules
make[1]: Entering directory '/home/pi/linux-0afb5e98488aed7017b9bf321b575d0177feb…
-
Hi,
I ttried a few github repos so far - still no luck. Anyone get those china based usb sticks working. They support both 2.4 /5 Ghz. Sadly so far I do not get them working on raspi.
Chip says …
-
Hello there im Using a Raspberry Pi and trying to make a hotspot using the latest dietpi armv7
but my usb wifi adaptor with (RTL8811cu) cannot be found,probably there are not drivers
i search the …
-
Using `make ARCH="arm64"` is needed for 64-bit raspberry pi os (rpi 3b+) otherwise the build fails with:
```
$ make
make ARCH=arm CROSS_COMPILE= -C /lib/modules/5.15.84-v8+/build M=/home/pi/RTL88…
-
As many of you may be aware, usb support for the rtw88 in-kernel driver was added with kernel 6.2. I maintain an out-of-kernel driver here for the same chipsets and noticed reports from users that the…
-
When building a dkms module with sudo, I get the following error: `sudo: argv[2] mismatch`
I can reproduce this error with two different dkms modules.
I cannot reproduce this error if login dire…
-
##### ```chipset - Realtek rtl8811cu (version without bluetooth support) - supported in-kernel since Linux kernel 6.2 (2023)```
I will begin adding adapters as time permits. I plan to add only adap…
-
Deletion of the wireless interface results in endless hang of `iw` process which could not be killed even with `kill -9` and makes the device unable to operate normally due to hangs on any operations …