-
I have two RAOP devices: an Apple TV, and an Airplay device. Looking at the terminal output for pulseaudio, it seems that the names are correctly gotten, but in the gnome sound UI, it only shows the …
-
Hello,
I have a problem with the correct operation of your program and the tevii662 tuner. It does not tune the frequency. The problem occurs on various platforms. Vlc also does not work.
[ …
-
It seems like the device cant attached because satpi cant read the signal stuff? Everything related to "monitor" is 0.
But minsatip and tvh works.
dvb-fe-tool -a 0 -m
Lock (0x1f) Signal= 29,8…
-
I am getting a delay of about 20 seconds.
This is outrageous...
I will look into it and comment if i find a solution.
-
Hi! I'm trying to tune in china multistream channels from ST2-88.0E via SatPI and I've just encountered some problems.
My SatPI server is installed on a zgemma h7s (with PnP DVB-S2x multistream tune…
-
Any Chance to implement ICAM support for CAID 098D ?
look here:
https://github.com/catalinii/minisatip/issues/1003
-
Hello, I have a question.
Currently, I am trying to use multiple RTSP streams. However, when I run several streams, the speed becomes very slow, making it practically unusable.
I am wondering if…
-
I wanted to use SATPI V1.6.2 with Raspberry Pi TV HAT (Sony CXD2880 based).
I was not successful at all, the only result I am able to get is this error:
```
…
Found StreamID x - SessionID: 02998…
-
Hello everyone,
I have the problem that only the first 8 tuners of my box work. I have a VU+ Duo 4k SE with 2x DVB-S2 FBC. The first 8 frontends work without any problems. But from number 9 onwards…
-
Currently a user may use the RTSP ANNOUNCE and RECORD commands to publish RTP/TCP and RTP/UDP Unicast streams to MediaMtx. However, RTP/UDP Multicast streams are not supported. Attempts to publish…