-
![image](https://github.com/geerlingguy/sbc-reviews/assets/13729856/1b31fa25-b442-417f-87fb-7614f246241b)
## Basic information
- Board URL (official): http://www.orangepi.org/html/hardWare/c…
-
So while developing the GUI extension I noticed that the key lock stays on no matter what you set.
I have a feeling the firmware is ignoring the register and keeping it on.
-
### Description of defect
While running the blinky example (https://github.com/ARMmbed/mbed-os-example-blinky) the current consumption of the MCU is constant (~500 uA).
What is expected to …
-
* **I'm submitting a ...**
- [ ] Bug report
- [X] Feature request
- [ ] Translation
* **Do you want to request a *feature* or report a *bug*?**
- [X] Feature
* **What is the cur…
-
I'm using this excellent library to run tasks, but I want the ESP to sleep otherwise. I have implemented light sleep, but that only runs on a `delay()` call. If my fastest task is 50ms and I don't car…
-
Sometimes, after recording a session, when I go to start another the accumulated power doesn't reset.
A couple of possible solutions:
* Always force accumulated power to 0 when starting logging
*…
-
I suggest a look at this as a really fun project:
https://www.aisec.fraunhofer.de/en/FirmwareProtection.html
Long story short, we could dump the firmware. I have one remaining 50V5A while the 50…
ghost updated
3 years ago
-
### Creating a bug report/issue
#### Required Information
- DietPi version | `G_DIETPI_VERSION_CORE=8
G_DIETPI_VERSION_SUB=21
G_DIETPI_VERSION_RC=1
G_GITBRANCH='master'
G_GITOWNER='MichaIng'`
…
-
Not sure if this is an actual bug. But I got my DPS today flashed it with OpenDPS and was playing with it. I currently set the voltage to 5.00 and when I turn it on it drops down to 4.74 even with out…
-
Creating an issue to track the upcoming TS80P.
So anything said here is speculation at the moment 😁
My current understanding I have pieced together is that it is possible to just add support …
Ralim updated
2 years ago